IMO FTPC Part 5:表面可燃性测试
IMO FTPC Part 5: Test for surface flammability
Field of application
Surface materials for bulkheads and ceilings and similar exposedsurfaces, floor coverings舱壁、天花板和甲板表面
等级评估:
Bulkhead, wall and ceiling linings | Floor coverings |
CFE Qsb Qt Qp Kw/m2 MJ/m2 MJ kW | CFE Qsb Qt Qp |
≥20 ≥1.5 ≤0.7 ≤4.0 | ≥7.0 ≥0.25 ≤2.0 ≤10.0 |
Where CFE: Critical flux atextinguishment 熄灭时临界热辐射量
Qsb: Heat forsustained burning 持续燃烧热值
Qt: Total heatrelease 热释放总值
Qp: Peak heat releaserate 热释放峰值
The test is terminated when any one of the following isapplicable;
1. The specimen fails toignite after a 10 minute exposure
2. Three minutes have passsince all flaming from the specimen ceased.
3. Flaming reaches the end ofthe specimen or self extinguishes and thus ceases to progress alongthe specimen. This criterion is only used when heat releasemeasurements are not being made.
4. In the case offloorcoverings, the test shall be terminated after 40 minutes.
IMO MSC 61(67) FTPC – 相关测试标准
IMO FTPC Part 1: Non-combustibility test 不燃物测试
IMO FTPC Part 2: Smoke and toxicity test 烟雾毒性测试
IMO FTPC Part 4: Test for fire door controlsystems 防火门控制系统测试
IMO FTPC Part 5: Test for surface flammability 表面燃烧试验
IMO FTPC Part 6: Test for primary deckcoverings 主要甲板覆盖物测试
IMO FTPC Part 7: Test for vertically supported textiles andfilms 垂直放置的纺织物料和覆膜测试
IMO FTPC Part 8: Test for upholstered furniture 软垫家具测试
IMO FTPC Part 9: Test for bedding components 床上用品测试
ISO 9705 and ISO 5660: Test for fire-restricting materials forhigh-speed craft 高速船舶防火材料
