一、测试项目:弹簧成分分析-拉伸试验
二、Photo of Sample
三、测试信息
Test item 1:Chemical Composition Analysis
Test method:Refer to GB/T 20123-2006,GB/T 200125-2006
Acceptance standard:GB/T 4354-2008,GB/T 699-2015
Test e:CS-2800 & ICP-OES
Test result:See below table
Conclusion: According to the test result, measured elementcontent of the sample complies with GB/T 699-2015 the type70 requirement.
Test item 3:Tensile Test
Test method:GB/T 228.1-2021
Test instrument:Universal testing machine
Test result:See below table
四、金属材料成分分析服务项目:
1、金属成分鉴定:通过仪器分析手段确定样品的成分及其比例后,通过对照所提供的材料牌号对应标准的要求,判定其是否符合标准要求。
2、金属牌号检测:通过仪器分析手段确定样品的成分及其比例后,查找对应该材料类型的标准,为客户推荐与该材料成分含量Zui接近的牌号。牌号推荐可以为客户提供一定的应用参考信息。
3、金属材料成分分析方法:电解法、电感耦合等离子发射光谱,电火花发射直读光谱(OES),电感耦合等离子体质谱,滴定法,重量法,X射线荧光光谱,氮氧氢分析仪。