HDPE 沙特SABIC CC453 抗撞击性高,食品接触的合规性
SABIC® HDPECC453
High Density Polyethylene
SABIC Americas, Inc.
产品说明：
SABIC HDPE CC453 is high density polyethylene speciallydeveloped for the injection and compression molding of Caps &Closures for the packaging of beverages . This grade offers anideal combination of impact strength, ESCR and meet organolepticproperties requirements.
Typical Applications
Caps & Closures for the packaging of Juice, water, milk andliquid dairy products
Key Features
Approved for organoleptics properties
Complies with food contacts regulations
High impact strength
Easy processing by injection and compression moldingmachines
物性信息：
| 基本信息 | |
|---|---|
| 特性 |
|
| 用途 |
|
| 形式 |
|
| 加工方法 |
|
| 物理性能 | 额定值 | 单位制 | 测试方法 |
|---|---|---|---|
| 密度 | 0.953 | g/cm³ | ASTM D1505 |
| 熔流率（熔体流动速率） (190°C/2.16 kg) | 4.0 | g/10 min | ASTM D1238 |
| 抗环境应力开裂 ( Igepal, 模压成型,F50) | 7.00 | hr | ASTM D1693B |
| 硬度 | 额定值 | 单位制 | 测试方法 |
|---|---|---|---|
| 肖氏硬度 (邵氏 D, 注塑) | 60 | ASTM D2240 |
| 机械性能 | 额定值 | 单位制 | 测试方法 |
|---|---|---|---|
| 抗张强度 | ASTM D638 | ||
| 屈服, 注塑 | 23.0 | MPa | ASTM D638 |
| 断裂, 注塑 | 21.0 | MPa | ASTM D638 |
| 伸长率 (断裂, 注塑) | > 800 | % | ASTM D638 |
| 弯曲模量 (注塑) | 800 | MPa | ASTM D790 |
| 弯曲强度 (注塑) | 21.0 | MPa | ASTM D790 |
| 冲击性能 | 额定值 | 单位制 |
|---|
