PC德国科思创(拜耳)9425/9425 GF20%玻纤增强 代理
PC/Makrolon® 9425/德国科思创 物性表分享到：
查看报价 |
规格用途
规格级别阻燃性,粘度，高,脱模性能良好 注射成型,挤出外观颜色可用颜色,不透明该料用途备注说明填料：玻璃纤维增强材料, 20% 填料按重量。
技术参数
性能项目试验条件[状态]测试方法测试数据数据单位物理性能密度(23°C)ISO11831.34g/cm³表观密度2
ISO600.64g/cm³熔流率（熔体流动速率）(300°C/1.2kg)
ISO11336.0g/10min溶化体积流率（MVR）(300°C/1.2kg)
ISO11335.00cm³/10min收缩率横向流量ISO25770.30to0.50%流量ISO25770.30to0.50%横向流量:2.00mm3ISO294-40.45%流量:2.00mm3ISO294-40.35%吸水率(饱和,23°C)
ISO620.24%吸水率(平衡,23°C,50%RH)
ISO620.10%机械性能拉伸模量(23°C)
ISO527-2/15800MPa拉伸应力(断裂,23°C)
ISO527-2/586.0MPa拉伸应变(断裂,23°C)
ISO527-2/52.6%TensileCreepModulus(1hr)
ISO899-15700MPa拉伸蠕变模量(1000hr)
ISO899-15200MPa弯曲模量4(23°C)
ISO1785500MPa弯曲应力4(23°C)
ISO178135MPaFlexuralStrainatFlexuralStrength5(23°C)
ISO1783.5%冲击性能CharpyNotchedImpactStrength6(23°C,CompleteBreak)
ISO73918.0kJ/m²简支梁无缺口冲击强度-60°C,CompleteBreakISO179/1eU50kJ/m²-30°C,完全断裂ISO179/1eU50kJ/m²23°C,完全断裂ISO179/1eU40kJ/m²NotchedIzodImpactStrength7(23°C,CompleteBreak)
ISO73918.0kJ/m²多轴向仪器化冲击能量-30°CISO6603-25.00J23°CISO6603-25.00J多轴向仪器化冲击力峰值-30°CISO6603-2900N23°CISO6603-2900N硬度球压硬度
ISO2039-1148MPa热性能热变形温度(0.45MPa,未退火)
ISO75-2/B142°C热变形温度(1.8MPa,未退火)
ISO75-2/A138°C维卡软化温度--ISO306/B50146°C--ISO306/B120148°CBallPressureTest(136°C)
IEC60695-10-2Pass
线形热膨胀系数-流动(23到55°C)
ISO11359-23.0E-5cm/cm/°CCLTE-Transverse(23to55°C)
ISO11359-26.5E-5cm/cm/°C导热系数8(23°C)
ISO83020.23W/m/KRTIElec(1.5mm)
UL746130°CRTIImp(1.5mm)
UL746125°CRTIStr(1.5mm)
UL746125°C电气性能表面电阻率
IEC600931.0E+16ohms体积电阻率(23°C)
IEC600931.0E+16ohms·cm介电强度(23°C,1.00mm)
IEC60243-136kV/mm相对电容率23°C,100HzIEC602503.30
23°C,1MHzIEC602503.30
耗散因数23°C,100HzIEC602501.0E-3
23°C,1MHzIEC602509.0E-3
漏电起痕指数解决方案AIEC60112175V解决方案BIEC60112125V可燃性UL阻燃等级0.50mmUL94V-2
1.5mmUL94V-0
3.0mmUL945VA
灼热丝易燃指数0.75mmIEC60695-2-12960°C1.5mmIEC60695-2-12960°C3.0mmIEC60695-2-12960°C热灯丝点火温度0.75mmIEC60695-2-13875°C1.5mmIEC60695-2-13875°C3.0mmIEC60695-2-13875°C极限氧指数9
ISO4589-235%ApplicationofFlamefromSmallBurner2.00mmDIN4102B2
MethodKandF:2.00mmDIN53438-1,-3K1,F1
BurningRate-US-FMVSS(>1.00mm)
ISO3795passed
FlashIgnitionTemperature
ASTMD1929470°C针焰试验MethodF:1.50mmIEC60695-11-52.0minMethodF:2.00mmIEC60695-11-52.0minMethodF:3.00mmIEC60695-11-52.0minMethodK:1.50mmIEC60695-11-51.0minMethodK:2.00mmIEC60695-11-52.0minMethodK:3.00mmIEC60695-11-52.0minSelfIgnitionTemperature
ASTMD1929550°CADDITIONAL INFORMATION补充信息
TestMethodNominalValueUnitElectrolyticalCorrosion(23°C)
IEC60426A1
ISOShortname
ISO7391-PC,MFR,(,,)-05-3,GF20
